TruCheck 750

TruCheck 750

$1,914.74

Operating Range ft-lbs75.0 – 750.0 ft-lbs
Operating Range in-lbs900.0 – 9000.0 in-lbs
Operating Range N.m100.0 – 1000.0 N.m
Dimensions5.7 in (d) x 5.9 in (w) x 3.3 in (h)
Accuracy+/-1%, +/-1 digit over the stated operating range
Display4 digit, 7 segment LED ; Update rate of twice/second (2Hz)
Temp Range – Operating+41°F to +104°F
Temp Range – Storage-4°F to +158°F
Auto Reset Hold Time2 Seconds
Weight lbs10.6 lbs
Weight kg4.8 kg
Drive Size27mm male hexagon
Supplied Adapter(s)3/4″ square drive socket
CertificationSupplied with a Traceable Calibration Certificate

About the TruCheck 750

The TruCheck 750 is capable of verifying the calibration of hand-held torque wrenches in real-time and can support a force range of 30 – 150 ft-lbs within +/-1% accuracy. One of the concerns in putting a torque tester into an environment where people are not calibration specialists is that incorrect selections will be made with the potential of incorrect tool setting and consequently joint failure.

The ‘TruCheck’ torque wrench testers aim to cut the cost of purchasing a torque wrench calibration system, and remove the fears over the complexity of using such equipment. Operate with the simplicity of a single button to zero the display.

Electromagnetic Compatibility (EMC) Directive: conforms with EN 61326 1997 Reading measurement unit and limit status (Low, OK and High) are output via RS-232. Comes with cable.

Additional information

Weight12 lbs
Dimensions14 × 14 × 8 in

Download product brochure

U.S. Patent Nos. 8,434,389 and 8,991,284

Canadian Patent No. 2,752,088

Japanese Patent No. 5699338